S
Sara DaltonAug 29, 2025
How to fix LG Receiver when it has no power?
- WwalkerjenniferAug 30, 2025
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
To Next PageTo Next PageHow to fix LG Receiver when it has no power?
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
Why can't I tune into radio stations on my LG HT902TBW?
If radio stations cannot be tuned in on your LG Receiver, ensure the antenna is securely connected. If the signal strength is weak, try tuning in the station manually. If no stations are preset, preset the stations.
How to fix LG HT902TBW Receiver remote control not working?
If your LG Receiver remote control isn't working correctly, here are some things to check: * Make sure you're pointing the remote control directly at the remote sensor on the DVD/CD Receiver. * Ensure you're using the remote control within a reasonable distance, about 23 ft (7 m). * Remove any obstacles that might be blocking the path between the remote and the receiver. * Try replacing the batteries in the remote control with new ones.
How to fix loud hum or noise from LG HT902TBW Receiver?
If you're experiencing a loud hum or noise, try these steps: First, clean the disc. Second, ensure the speakers and components are securely connected. Third, the DVD/CD Receiver might be too close to the TV, so try moving them further apart.
How to fix if nothing is displayed on the front panel of my LG HT902TBW Receiver?
Press DIMMER on the remote control of your LG Receiver.
How to improve poor playback picture on LG HT902TBW?
If the playback picture on your LG Receiver is poor, try the following: 1. Clean the disc. 2. Ensure a disc is inserted. 3. Make sure a playable disc is inserted, checking the disc type, color system and regional code. 4. Place the disc with the playback side down and correctly within the guide. 5. Turn off any menu screen by pressing the SETUP button. 6. Cancel the Rating function or change the rating level.
Why my LG HT902TBW has no power?
If your LG Receiver has no power, the power cord may be disconnected. Ensure the power cord is securely plugged into the wall outlet.
What to do if LG HT902TBW Receiver playback picture is poor?
If the playback picture on your LG Receiver is poor, try cleaning the disc.
What to do if my LG Home Theater System remote control does not work properly?
If the remote control isn't working correctly, ensure that it is pointed at the remote sensor on the DVD/CD Receiver and that you are within a 23 ft (7 m) range. Also, check for any obstacles between the remote and the receiver. If the issue persists, replace the batteries with new ones.
What to do if LG HT902TBW remote control does not work?
If the remote control for your LG Receiver isn't working correctly, consider these potential solutions: * Make sure the remote control is pointed directly at the remote sensor on the DVD/CD Receiver. * Ensure you are within about 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles that might be blocking the path between the remote control and the receiver. * Replace the batteries in the remote control with new ones.
General
