S
Sara DaltonAug 29, 2025
How to fix LG Receiver when it has no power?
- WwalkerjenniferAug 30, 2025
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
To Next PageTo Next PageHow to fix LG Receiver when it has no power?
If your LG Receiver has no power, the power cord might be disconnected. Ensure the power cord is securely plugged into the wall outlet.
How to tune radio stations on LG Receiver?
If you can't tune in radio stations on your LG Receiver, here are a few things to try: * Ensure the antenna is securely connected. * If the signal strength is weak, try tuning in the station manually. * If no stations are preset, preset the stations.
How to fix LG HT902TBW Receiver remote control not working?
If your LG Receiver remote control isn't working correctly, here are some things to check: * Make sure you're pointing the remote control directly at the remote sensor on the DVD/CD Receiver. * Ensure you're using the remote control within a reasonable distance, about 23 ft (7 m). * Remove any obstacles that might be blocking the path between the remote and the receiver. * Try replacing the batteries in the remote control with new ones.
Why is there no picture on my LG Home Theater System?
There might be several reasons for the absence of a picture. First, ensure that your TV is set to the correct video input mode to receive the DVD signal. Second, check that the video cable is securely connected to the jacks. Finally, verify that the connected TV is powered on.
Why my LG HT902TBW has no power?
If your LG Receiver has no power, the power cord may be disconnected. Ensure the power cord is securely plugged into the wall outlet.
Why does my LG HT902TBW Receiver make a loud hum or noise?
If you're hearing a loud hum or noise from your LG DVD/CD Receiver, here are a few possible reasons: * The disc is dirty, so clean the disc. * The speakers and components are connected poorly, so connect the speakers and components securely. * The DVD/CD Receiver is located too close to the TV, so move your TV away from the audio components.
What to do if nothing is displayed on the front panel display of my LG Home Theater System?
To resolve this, press DIMMER on the remote control.
Why is there no sound from my LG Home Theater System, or why is the sound very low?
If you're experiencing no sound or very low sound, there are a few potential causes. First, ensure the equipment connected with the audio cable is set to receive the DVD audio signal output by selecting the correct input mode on the receiver. Second, check that the audio cables are securely connected. Third, verify that the equipment connected with the audio cable is turned on. Finally, the audio connecting cable may be damaged, and you should try replacing it.
What to do if my LG Home Theater System remote control does not work properly?
If the remote control isn't working correctly, ensure that it is pointed at the remote sensor on the DVD/CD Receiver and that you are within a 23 ft (7 m) range. Also, check for any obstacles between the remote and the receiver. If the issue persists, replace the batteries with new ones.
What to do if LG HT902TBW remote control does not work?
If the remote control for your LG Receiver isn't working correctly, consider these potential solutions: * Make sure the remote control is pointed directly at the remote sensor on the DVD/CD Receiver. * Ensure you are within about 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles that might be blocking the path between the remote control and the receiver. * Replace the batteries in the remote control with new ones.
General
