To Next PageTo Next PageWhy is my LG Home Theater System power on, but the DVD/CD Receiver does not work?
If the power is on but the DVD/CD Receiver isn't working, the most likely reason is that no disc is inserted. Insert a disc and check that the DVD or audio CD indicator in the DVD display is lit.
What to do if LG HT902TBW remote control does not work?
If the remote control for your LG Receiver isn't working correctly, consider these potential solutions: * Make sure the remote control is pointed directly at the remote sensor on the DVD/CD Receiver. * Ensure you are within about 23 ft (7 m) of the DVD/CD Receiver. * Remove any obstacles that might be blocking the path between the remote control and the receiver. * Replace the batteries in the remote control with new ones.
What to do if my LG Home Theater System remote control does not work properly?
If the remote control isn't working correctly, ensure that it is pointed at the remote sensor on the DVD/CD Receiver and that you are within a 23 ft (7 m) range. Also, check for any obstacles between the remote and the receiver. If the issue persists, replace the batteries with new ones.
Why is there no sound from my LG Home Theater System, or why is the sound very low?
If you're experiencing no sound or very low sound, there are a few potential causes. First, ensure the equipment connected with the audio cable is set to receive the DVD audio signal output by selecting the correct input mode on the receiver. Second, check that the audio cables are securely connected. Third, verify that the equipment connected with the audio cable is turned on. Finally, the audio connecting cable may be damaged, and you should try replacing it.
What to do if nothing is displayed on the front panel display of my LG Home Theater System?
To resolve this, press DIMMER on the remote control.
What to do if my LG Receiver remote control does not work?
If the remote control isn't working, first, ensure that you're pointing it directly at the remote sensor on the LG DVD/CD Receiver. Second, make sure you are within 23 ft (7 m) of the receiver. Third, check for any obstacles between the remote and the receiver and remove them. Lastly, try replacing the batteries in the remote control with new ones.
What to do if there is no sound from my LG Receiver?
If you're not getting any sound or the sound is very low, ensure that the equipment connected to the audio cable is set to receive the DVD audio signal output. Also, check that the audio cables are securely connected to the jacks. Verify that the connected equipment is turned on. If the problem persists, the audio connecting cable may be damaged and need replacing.
Why is the remote control for my LG HT902TBW Receiver not working?
If the remote control isn't working properly with your LG DVD/CD Receiver, consider these potential causes: * Ensure you're pointing the remote control directly at the remote sensor on the receiver. * Make sure you're using the remote within a reasonable distance, about 23 ft (7 m). * Check for any obstacles blocking the path between the remote and the receiver. * Try replacing the batteries in the remote control with new ones.
How to fix LG HT902TBW Receiver remote control not working?
If your LG Receiver remote control isn't working correctly, here are some things to check: * Make sure you're pointing the remote control directly at the remote sensor on the DVD/CD Receiver. * Ensure you're using the remote control within a reasonable distance, about 23 ft (7 m). * Remove any obstacles that might be blocking the path between the remote and the receiver. * Try replacing the batteries in the remote control with new ones.
How to tune radio stations on LG Receiver?
If you can't tune in radio stations on your LG Receiver, here are a few things to try: * Ensure the antenna is securely connected. * If the signal strength is weak, try tuning in the station manually. * If no stations are preset, preset the stations.
General
