LG LCS710DAB - Tuner Operation and Presets; Tuner and Band Selection; Station Tuning Methods; Storing and Recalling Preset Stations

Operating 17
Operating
3
Listening to the
TUNER
1. Press SRC repeatedly to select a source to
TUNER.
2. Press BAND repeatedly to select a desired band.
3. For manual search, press and hold
A
/
D
on
the unit until “MANUAL“ is displayed. Then press
it repeatedly to select a desired frequency.
Or press and hold
c
/
v
on the remote
control.
For auto search, press
A
/
D
on the unit until
“SEARCH” is displayed. (Except MW)
Or press
c
/
v
on the remote control.
4. Rotate the volume knob on the unit to adjust
the volume.
Or press VOLUME
W
/
S
on the remote control.
Storing desired frequencies
manually
1. Press BAND to select a desired band you want
to store.
2. Select the desired frequency by using
A
/
D
on
the unit.
Or use
c
/
v
on the remote control.
3. Press the volume knob and rotate the volume
knob to select a preset station among 1 to 6
and then press and hold the volume knob until
the beep sound is heard.
Or press ENTER and press
w
/
s
to select a
preset station among 1 to 6 and then press and
hold ENTER until the beep sound is heard on
the remote control.
Or press and hold one of preset buttons among
1 to 6 on the remote control until the beep
sound is heard.
Or press and hold one of preset buttons among
1 to 6 on the unit until the beep sound is heard.
(Only LCS710BRS / LCS710DAB)
4. Repeat steps 1 to 3 to preset other stations.
When a station is stored on the preset
numbers on which another station of the same
band has already been preset, the previously
preset station is automatically erased.
,
Note
Listening to a preset station
1. Press BAND repeatedly to select a desired band.
2. Press the volume knob on the unit.
Or press ENTER on the remote control.
3. Rotate the volume knob to select a preset
station.
Or press
w
/
s
on the remote control.
4. Press the volume knob.
Or press ENTER on the remote control.
Or
Press BAND and then press the desired preset
button among 1 to 6 on the remote control.
Or press BAND and then press the desired preset
button among 1 to 6 on the unit. (Only LCS710BRS
/ LCS710DAB)