17
Getting Started
3. When the phone has been fully
charged, disconnect the travel charger
from the phone by pulling the
connector out.
n Notice
] If your phone is powered on while
charging, you’ll see the bars in the
battery indicator icon cycle.
When the battery is fully charged, the
bars in the battery indicator icon will
flash on and off.
If the battery fails to charge
completely:
] After turning the phone on and off,
please attempt to recharge the battery.
] After detaching and reattaching the
battery, please attempt to recharge the
battery.
Turning Your Phone On
and Off
1. Hold down the [PWR/END] key
until the phone switches on.
2. If the phone asks for a PIN, enter the
PIN and press the key.
The phone searches for your network,
and after finding it goes to the idle
screen, as illustrated below. From the idle
screen, you can make or receive a call.
n Note
The display language is preset to
Automatic at the factory. To change the
language, use the Languages menu
option (Menu 9.2.5).
3. When you wish to switch the phone
off, hold down the [PWR/END]
key until the power-off image
displays.
To Next Page
Loading...
