Adjusting the Volume
During a call, if you want to adjust the
earpiece volume, use the up/down
navigation key on the phone.
Answering a Call
When you receive a call, the phone rings
and the flashing phone icon appears on
the screen. If the caller can be identified,
the caller’s phone number (or name if
stored in your Address Book) is displayed.
1. Press the [SEND] key or the left
soft key to answer an incoming call. If
Any Key has been set as the Answer
Mode (Menu 9.4.3), any key press will
answer a call except for the
[PWR/END] key or the right soft key.
2. End the call by pressing the
[PWR/END] key.
n Notice
You can answer a call while using the
Address Book or other menu features.
Vibrate Mode (Quick)
Vibrate Mode can be activated by
pressing and holding down the
[Star] key.
Signal Strength
If you are inside a building, being near a
window may give you better reception.
You can see the strength of your signal
by the signal indicator on your phone’s
display screen.
21
General Functions
To Next Page
Loading...
