25
Your phone provides a number of control
functions that you can use during a call.
To access these functions during a call,
press the right soft key Options.
During a Call
The menu displayed on the handset
screen during a call is different than the
default main menu displayed when in
standby mode, and the options are
described below.
Making a Second Call
You can select a number you wish to dial
from your Contact List to make a second
call. Press the right soft key Options then
select Contact List.
Swapping Between Two Calls
To switch between two calls, press the
[SEND] key.
Answering an Incoming Call
To answer an incoming call when the
handset is ringing, simply press the
[SEND] key. The handset is also able to
warn you of an incoming call while you
are already on a call. A tone sounds in
the earpiece, and the display will show
that a second call is waiting. This feature,
known as Ca ll Waiting, is only available
if your network supports it.
If Ca ll Waiting is available, you can put
the first call on hold, and answer the
second call by pressing the [SEND]
key.
Rejecting an Incoming Call
You can reject an incoming call without
answering by simply pressing the
[PWR/END] key.
During a call, you can reject an incoming
call by pressing the [PWR/END] key.
Muting the Microphone
You can mute the microphone during a
call by pressing the left soft key Mute.
The handset can be unmuted by
pressing the left soft key Unmute. When
the handset is muted, the caller cannot
hear you, but you can still hear the caller.
Using the Speakerphone
You can use the integrated
Speakerphone during a call by pressing
the right soft key Options then select
In-Call Menu
To Next Page
Loading...
