Speaker On. The Speakerphone indicator
[] will display on the display screen.
The Speakerphone is automatically
deactivated when you end the call.
n Warning
Because of the higher volume level, don’t
place the phone too close your ear while
the Speakerphone is enabled.
Conference Calls
The Conference Call service provides you
with the ability to have a simultaneous
conversation with more than one caller.
The Conference Call feature can be used
only if your network service provider
supports this feature. The Conference
Call can only be set up when you have
one call active and one call on hold,
meaning both calls must have been
answered. Once a Conference Call is set
up, calls may be added, disconnected or
separated (that is, removed from the
Conference Call but still connected to
you) by the person who set up the
Conference Call. These options are all
available from the In-Call menu. The
maximum number of callers in a
Conference Call is five. Once started, you
are in control of the Conference Call, and
only you can add calls to the Conference
Call.
Making a Second Call
You can make a second call while
currently on a call simply by entering the
second number and pressing the
[SEND] key. When the second call is
connected, the first call is automatically
placed on hold. You can swap between
calls, by pressing the [SEND] key.
Setting Up a Conference Call
To set up a Conference Call, place one
call on hold, conference in the second
active call by pressing the right soft key
and select the Join Calls sub menu
option from the Conference Call menu.
Activate the Conference Call
on Hold
To activate a Conference Call on hold,
press the [SEND] key.
26
In-Call Menu
To Next Page
Loading...
