To Next PageTo Next PageWhat to do if my LG LRE3193BD oven element does not heat?
If the oven element in your LG Ranges isn't heating, check the circuit breaker first. If that's not the issue, inspect and repair or replace any loose or bad wiring, consulting the wiring diagrams for guidance. Test and replace the element if necessary. A defective main PCB or relay PCB could also be the cause, so test and replace those components as needed.
What to do if my LG LRE3193BD oven is not operating?
If your LG Ranges oven isn't operating, first ensure that there is power present at the unit and that the circuit breaker hasn't tripped. Also, check the household fuse capacity and replace it if necessary. If these steps don't resolve the issue, the main PCB may be faulty and require testing or replacement; refer to pages 9-1 through 9-3 for guidance.
Why does my LG Ranges oven not bake (Selection is set for to BAKE or TIMED BAKE)?
If your LG Ranges oven isn't baking when set to BAKE or TIMED BAKE, the possible causes include loose or bad wiring, a defective BAKE element, a defective electronic clock, or a door switch sensing error. To resolve this, verify all connections are clean and tight, and replace any broken wires. Test and replace the BAKE element if needed. Also, you may need to replace the main PCB or relay PCB. Check the door switch and the contact point between the door and the door switch.
What to do if my LG Ranges oven is overheating?
If your LG Ranges oven is overheating, it could be due to loose or bad wiring to the latch system, a defective oven sensor, or a faulty main PCB. Repair or replace any damaged wiring. Test and replace the oven sensor if necessary. You might also need to test and replace the PCB.
What to do if my LG LRE3193BD Ranges oven does not begin clean cycle Oven stop for Self clean cycle?
If your LG Ranges oven isn't starting or stops during the self-clean cycle, it could be due to bad wiring, a faulty latch system, a programming error, or a defective contact point with the door switch. First, repair or replace any faulty wiring. Then, check the door locking motor and micro switch. Try resetting the oven by switching off the circuit breaker for five minutes before turning it back on. Finally, test the door switch and check the contact point between the door and door switch.
Why is the electronic timer on my LG LRE3193BD not accepting programming?
If the electronic timer on your LG Ranges isn't accepting programming, it's likely due to a failed main PCB. In this case, you will need to replace the main PCB.
Why are the clock and timer not working on my LG LRE3193BD?
If the clock and timer on your LG Ranges are not working, it's probably due to a power outage. Verify that power is present at the unit and that the circuit breaker hasn't tripped. Replace the household fuse, ensuring not to exceed the original fuse capacity. Refer to the Owner’s manual instructions for additional guidance.
Why does my LG LRE3193BD surface element cycle frequently?
Frequent cycling of the surface element on your LG Ranges is normal. The element cycles on and off to maintain the selected heat setting.
What does it mean if the “HS” (Hot surface) warning message does not light up on my LG Ranges?
If the “HS” (Hot surface) warning message isn't lighting up on your LG Ranges, it could indicate a defective main PCB. You should test and/or replace the main PCB.
Why is my LG Ranges oven door difficult to open?
If your LG Ranges oven door is difficult to open, it could be due to a worn or broken broil stop roller. To fix this, replace the oven door hinge.
General| Clock type | Electronic |
|---|---|
| Control type | Touch |
| Display type | VFD |
| Handle color | Stainless steel |
| Product type | Freestanding cooker |
| Product color | Black, Stainless steel |
| Built-in display | Yes |
| Control position | Front |
| Warming drawer position | Bottom |
| Grill | - |
| Oven size | Large |
| Number of ovens | 1 |
| Oven door opening | Drop down opening |
| Oven net capacity | 160 L |
| Oven power source | Electric |
| Oven door material | Glass |
| Number of oven grids | 2 |
| Number of shelf positions | 7 |
| Oven interior dimensions (W x D x H) | 609 x 482 x 558 mm |
| Hob type | Zone induction hob |
| Hob cover | No |
| Cooking zone 1 type | Small |
| Cooking zone 3 type | Medium |
| Cooking zone 1 power | 1200 W |
| Cooking zone 3 power | 3200 W |
| Cooking zone 4 power | 2700 W |
| Cooking zone 1 diameter | 152 mm |
| Cooking zone 1 position | Left rear |
| Cooking zone 2 position | Right rear |
| Cooking zone 3 diameter | 228 mm |
| Cooking zone 3 position | Left front |
| Cooking zone 4 diameter | 304 mm |
| Cooking zone 4 position | Right front |
| Number of cooking zones | 5 zone(s) |
| Number of gas cooking zones | 0 zone(s) |
| Package depth | 762 mm |
| Package width | 838 mm |
| Package height | 1270 mm |
| Package weight | 76636 g |
| Energy consumption (conventional) | - kWh |
Weight and Dimensions| Depth | 711 mm |
|---|---|
| Width | 736 mm |
| Height | 1193 mm |
Critical safety advice for using and servicing the oven to prevent hazards.
Information on locating model and serial number labels and tech sheets for service.
Technical specifications of the electric range, including dimensions, power, and materials.
Overview of the range's general operational aspects and features.
Explanation of the various keys, display elements, and their functions on the control panel.
Illustration and identification of internal components and their physical positions.
Step-by-step guides for removing PCBs, elements, door, and fan assemblies.
Methods and expected resistance values for testing motors, sensors, lamps, and heating elements.
Schematic of electrical connections and functional key layout of the control system.
List of error codes, their descriptions, and how to detect them.
Step-by-step guides for diagnosing issues like power failure, no heating, sensing, and touch errors.
Procedure for testing the functionality of control panel buttons.
Troubleshooting steps for various operational and heating issues.
Detailed wiring diagrams for cook-top and oven circuits.
Exploded view diagrams for identifying and locating appliance parts.
