6-1
Copyright © LG Electronics Inc. All rights reserved.
Only training and service purposes
CHECK THE FAILURE CODE
■
When the oven has some failure on cooking,
Cooking will be canceled automatic value and logs of F-come will be recorded in EEPROM.
F-code will not display during normal operation.
■
Check the failure code as follow these steps.
1. press the “clear” Button
2. press the “BAKE” and “BROIL” Button at the same time
If the oven has some failure, the oven will show the failure code, like FIG.1
It shows the type of F-code and times of failure alternately for each two seconds.
If the oven do not has any failure, the Oven will show it like FIG. 2
NOTE:
After checking for the F code, press the “CLEAR” key to remove all codes.
< FIG. 2 >
< FIG. 1 >
Times of the
occurred failure
Type of F-code
To Next Page
Loading...
Need help?
General
