5. Bend the tubing as shown in the figure and
bind the pipings, the connecting cables and the
drain hose altogether.
• Make a small loop for easy connection later.
6. Wrap the tubing, the drain hose and the
connecting cable.
7. Indoor unit installation
• Hook the indoor unit onto the upper portion of
installation plate.(Engage the two hooks of the
rear top of the indoor unit with the upper edge of
the installation plate.)
Ensure the hooks are properly seated on teh
installation plate by moving it in left and right.
CAUTION : Take care to arrange the pipings, drain
hose and cables as the feature for
inserting it into the indoor unit and
mount the indoor unit on the installa-
tion plate.
—16—
Press the lower left and right side of the unit against
the Installation Plate until the hooks engages with
their slots (sound click).
To Next Page
Loading...
