ADVANCED FUNCTIONS
17
ENGLISH
Disabling auto restart
Restarting the air conditioner
automatically
When the air conditioner is turned on again
after a power failure, this function restores
the previous settings. This function is a facto-
ry default setting.
1 Press the On/Off button and hold it for 6
seconds.
- The unit will beep twice and the lamp
will blink twice 4 times.
- To re-enable the function, press the On/
Off button and hold it for 6 seconds. The
unit will beep twice and the lamp will
blink 4 times.
* The feature can be changed according to
type of model.
NOTE
!
If you press and hold the On/Off button
for 3 – 5 seconds instead of 6 seconds,
the unit will switch to the test operation.
In the test operation, the unit blows out
strong air for cooling for 18 minutes and
then returns to the factory default set-
tings.
To Next Page
Loading...
Need help?
General
