LG LSW240B - User Manual

Need help?

Do you have a question about the LG LSW240B and is the answer not in the manual?

Summary

Important Safety Instructions

Professional Installation Required

This wall mount should be installed by a trained and experienced installer designated by the retailer.

Cable Management During Installation

Never hang power or signal cables on the rear side of the TV during installation to prevent damage.

Structural Support Requirements

Do not install where the weight cannot be supported; inadequate support can cause injury.

Avoid Overloading After Installation

Do not hang on or impact the product after installation, as it may fall and cause injury.

Cautionary Advice

Follow User Manual Instructions

Power Disconnection Before Installation

Two-Person Installation;Adjustment

Always install or adjust height with 2 people to prevent falls and injuries.

Installation Method Guide

Assemble Wall Mount Support and Display

Attach the display to the wall mount, secure with safety clips, and check stability.

This document is the owner's manual for the LG LSW240B Wall Mounting Bracket, designed to securely mount a display to a wall. It provides comprehensive instructions for installation, safety guidelines, and maintenance advice, ensuring proper and safe operation.

Function Description

The LG LSW240B Wall Mounting Bracket serves as a robust and adjustable support system for mounting compatible displays to various wall types. Its primary function is to provide a stable and secure attachment point for the display, allowing for optimal viewing angles and space-saving installation. The bracket is designed to accommodate displays with a VESA specification of 200 x 200, ensuring compatibility with a range of LG televisions.

The mounting system allows for angular adjustments, specifically a tilt range of -15° to +15° (±2°), enabling users to fine-tune the display's vertical angle for the best viewing experience. This adjustability helps in reducing glare and optimizing visibility from different positions within a room. The bracket is engineered to support a maximum UL load capacity of 40 kg, indicating its strength and reliability for holding substantial display weights.

The installation process involves attaching a mounting bracket to the TV and then securing the wall mount to the wall. The manual details procedures for both masonry walls and wooden studs, providing specific instructions for drilling, anchoring, and tightening screws based on the wall material. Components included with the bracket, such as wall mount anchors, screws, guide spacers, and safety clips, are integral to its secure installation and functionality.

Usage Features

The LG LSW240B Wall Mounting Bracket offers several usage features that enhance its practicality and user experience:

Adjustable Viewing Angle: The bracket allows for a tilt adjustment of -15° to +15°, providing flexibility to achieve the desired viewing angle. This feature is particularly useful in rooms where lighting conditions or seating arrangements require frequent adjustments to avoid glare or improve visibility.
Secure Installation: The design incorporates safety clips and specific screw tightening instructions to ensure the display is firmly attached to the wall mount and the wall. The manual emphasizes the importance of proper installation to prevent accidental detachment and potential injury or damage.
Cable Management: The manual provides guidance on arranging cables to prevent them from being pinched or damaged between the wall mount and the display. This not only contributes to the longevity of the cables but also helps maintain a neat and organized appearance.
Set Protection Cushion: Included set protection cushions are designed to mitigate impact between the wall and the display when adjusting the angle. This feature protects both the wall and the display from scratches or damage during manipulation.
Compatibility: The bracket is designed for displays with a 200 x 200 VESA mounting pattern, making it compatible with a wide range of LG televisions. Users are advised to consult their TV owner's manual for applicable models to ensure proper fit.
Leveling Adjustment: After installation, the wall mount allows for minor adjustments (±5 mm) to ensure the display is perfectly level, contributing to a professional and aesthetically pleasing setup.

Maintenance Features

The LG LSW240B Wall Mounting Bracket is designed for durability and minimal maintenance, but the manual provides important guidelines to ensure its long-term safety and performance:

Professional Installation Recommended: The manual strongly recommends installation by a trained and experienced installer designated by the retailer. This is crucial for ensuring the bracket is installed correctly and safely, minimizing the risk of damage or injury. While not a direct maintenance feature, proper initial installation is the foundation for trouble-free use.
Regular Safety Checks (Implicit): Although not explicitly stated as a maintenance task, the emphasis on secure tightening of screws and checking the wall's strength implies that periodic checks of the installation's integrity would be beneficial. Users are advised not to hang on the product or apply severe impact to it after installation, which is a form of preventative maintenance.
Cleaning Guidelines: The manual advises against wiping the product with a wet towel or using heaters/humidifiers near it. This suggests that cleaning should be done with a dry cloth to prevent moisture ingress, which could lead to electrical shock or product damage.
Cable Integrity: Users are instructed to never hang power or signal cables on the rear side of the TV when installing the wall mount. This prevents cable damage, which could lead to fire, electric shock, or product malfunction. Proper cable arrangement, as detailed in the manual, is a key maintenance aspect to ensure safety and functionality.
Weight Restrictions: The manual warns against installing a TV that exceeds the weight restrictions of the wall mount. Adhering to these limits is a critical maintenance consideration to prevent structural failure of the bracket and potential damage to the display or injury.
Tool Usage Caution: Users are reminded to be careful with the tools used during installation to prevent accidents or damage. This highlights the importance of safe practices during any adjustments or re-installations.
Retention of Manual: The manual emphasizes retaining it for future reference. This allows users to revisit installation and safety guidelines if they need to move, adjust, or troubleshoot the wall mount, serving as a crucial maintenance resource.

In summary, the LG LSW240B Wall Mounting Bracket is a versatile and secure solution for mounting displays, offering adjustable viewing angles and robust construction. Its usage and maintenance are guided by clear instructions aimed at ensuring safety, stability, and optimal performance over time.

LG LSW240B Specifications

General

Mounting type	Wall
Minimum VESA mount	200 x 200 mm
Maximum screen size	43 \
Minimum screen size	32 \
Maximum weight capacity	- kg
Tilt angle range	-12 - 12 °
Product color	Silver