ENGENGLISH
21
INSTALLATION MENU
Limited Mode
-
Configure TV function’s limitation. When selected to ‘Yes’, following sub-menus will be worked by below.
Setup Menu
-
Decide to enter 'Setup’ Menu’ as ‘Yes’(Enter possible) or ‘No’(Enter impossible)
Programme Change
y
Decide to change channel or not by setting ‘Program Change' as ‘Yes’(Change Possible) or ‘No’(Change Impossible) when present
source is TV.
-
When ‘Programme Change' is set to No (Change Impossible)
» Program Key, Numeral Key, List Key, Q.View Key don't work and entering 'Channel Menu' in the Main Menu OSD is
impossible.
» ‘Programme' item in 'On Time' menu will be fixed.
» Entering ‘Setup Menu' in the 'Main Menu’ OSD is impossible regardless of ‘Setup Menu' item.
-
When 'Program Change’ is set to Yes(Change Possible), ‘Program Key’, ‘Numeric Key’, ‘List Key’, ‘Q.View’ Key does work and
entering ‘Channel Menu' in the Main Menu OSD is possible.
Menu Display
y
Function to decide whether work with menu (including relevant menus too) of control key (Yes – Enter possible) or not (No –
Enter Impossible).
-
Although select No(Enter impossible), the action that press a Menu button for 5 seconds to enter ‘Installation Menu’ is
available.
-
When select Yes(Enter possible), Menu works.
OSD Display
y
Decide to display OSD or not by setting ‘OSD Display’ as Yes(Display) or No(Do not Display).
-
When ‘OSD Display’ is set to ‘No’(Do not Display), all OSD is not displayed except some exception.
-
Although select ‘No’ (Do not Display), the action that press a Menu button for 5 seconds to enter ‘Installation Menu’ and
entering service menu are available. (In-Start, Power-Only, Adjust, Installation Menu…)
System Provider Mode
y
‘System Provider Mode’ allows access to the menu system from the front panel or remote control but access is controlled as follows:
-
When value is ‘Yes’, Accessible Items on the menu system, others are not permissible.
» Input select screens
» Sleep timer
» Aspect Ratio
» Subtitles
» Programmes (Except for Programme Tuning & Settings and Programme Manager)
» ‘Safety’ / ‘Photo&Video/Music’ / ‘Network’ / ‘Support’ / ‘Bluetooth’ Menu
-
‘Q.menu’, which is related to ‘Setup’ Menu, is not accessible.
-
If the channel map is empty, ‘Auto-tuning’ guide dialog should be blocked by pressing ‘List’, ‘Fav’, ‘CH+’, ‘CH-’ keys.
DTV Programme Update
-
It is a mode to set whether to update dtv Programme automatically or not.
-
When DTV Programme Update is set to ‘Auto’, the function to update TV’s programme map according to dtv programme’s
stream information.
-
DTV Programme Update is set to ‘Manual’, the function to keep TV’s programme map even though dtv programme’s
information is changed.
To Next Page
Loading...
Need help?
General
