ENGENGLISH
49
EXTERNAL CONTROL DEVICE SETUP
Command Reference List
(Depending on model)
COMMAND1 COMMAND2
DATA
(Hexadecimal)
01. Power k a 00 to 01
02. Aspect Ratio k c (See p. 50)
03. Screen Mute k d (See p. 51)
04. Volume Mute k e 00 to 01
05. Volume Control k f 00 to 64
06. Contrast k g 00 to 64
07. Brightness k h 00 to 64
08. Colour k i 00 to 64
09. Tint k j 00 to 64
10. Sharpness k k 00 to 32
11. OSD Select k l 00 to 01
12. Remote Control Lock Mode k m 00 to 01
13. Balance k t 00 to 64
14. Colour Temperature x u 00 to 64
15. Energy Saving j q (See p. 53)
16. Auto Conguration j u 01
17. Equalize j v (See p. 53)
18. Tune Command m a (See p. 54)
19. Programme Add/Skip m b 00 to 01
20. Key m c (See p. 54)
21. Control Back Light m g 00 to 64
22. Input select x b (See p. 55)
• During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are not executed and treated as NG.
To Next Page
Loading...
Need help?
General
