ENGENGLISH
31
INSTALLATION MENU
External Speaker
(Depending on model)
Volume Control
-
Selects the volume control method of an external speaker.
You can select ‘Off’, ‘Int Variable’,’ Fixed.’,’Ext Variable’ by < > pressing button.
Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 1 Watts.
Int variable is linked to the main volume OSD and change the volume 0 - 1 Watts.
Fixed produces a fixed output. The default is Off.
Output
-
This item is enabled when Volume Control is set to Fixed. You can choose one of 7 steps.(0.01/0.03/0.05/0.1/0.2/0.5/1
Watts). The Default is 1 Watt.
Set ID Setup
Set ID Lock
-
Set the ‘Set ID’ item in ‘GENERAL’ Menu whether to activate or not.
-
Set to Yes(Work) or No(Do Not Work).
Set ID
-
Set the ‘Set ID’ of TV Set with 1~99.
Power Saving
Static Saving
-
It is the item for setting the level to reduce the backlight control from the items for saving the consuming power, which
is increased or decreased by 10 steps from 0 to 100. 100 makes the consuming power set to the same one from the TV. 0
reduces the consuming power to the minimum. The default value is 100.
* The value displayed at the OSD is not changed and only the actual setting value is converted to
percentage based on the static saving value to set.
* 0 ~ 30: HIGH, 40 ~ 60 : MID , 70 ~ 90 : LOW , 100 : OFF
Keyless Off Hours
-
Automatically TV will be turned off if there is no key input for the preset time period.
* Set the ‘OFF’, ‘1~99’.
To Next Page
Loading...
Need help?
General
