APPENDIX
09. Tint (Command: k j)
I_ To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
[k] [j][ ] [Set iD][ ] [Data] [Cr]
Data Red : 00 - Green : 64
* Refer to 'Real data mapping 1'. See page 100.
[j] [ ][Set ID] [ ] [OK!NO] [Data] Ix]
I 3. Balance (Command: k t)
I_ To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission
[k] [t] [ ][Set!D] [ ] [Data] [Cr]
Data Min:00-Max:64
* Refer to 'Real data mapping 1 '. See page 100.
Ack
It] [ ] [Set ID] [ ][OK!NO] [Data] Ix]
10. Sharpness (Command: k k)
I_ To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k] [k] [] [set ID] [] [Data] [Cr]
Data Min:00-Max:64
* Refer to 'Real data mapping 1' See page 100.
Ark
[k] [ ] [Set ID] [ ] [OK!NO] [Data] Ix]
14. Colour Temperature (Command: k u)
I_ To adjust colour temperature. You can also adjust
Colour Temperature in the PICTURE menu.
Tran _mi_ion
[k] [u][ ] [set ID][ ] [Data] [Cr]
Data 00: Medium 01: Cool 02: Warm
At2
[u] [] [Set ID][] [OK/NO] [Data][x]
1 I. OSD Select (Command: k I)
I_ To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission
[k] [I] [] [set ID] [] [Data] [Cr]
Data O0 : OSD off 01 : OSD on
Ack
[I] [] [Set ID] [] [OK/NG] [Data] [x]
1 2. Remote control lock mode (Command: k m)
I_ To lock the front panel controls on the monitor and
remote control.
Tran _mi_ion
[k] [m] [] [Set ID][ ] [Data] [Cr]
Data 00 : Lock off 01 : Lock on
Ack
[m] [] [Set ID] [ ] [OK!NO] [Data] [x]
* If you are not using the remote control, use this mode.
When main power is on/off, external control lock is
released.
I S. Abnormal State (Command: k z)
I_ To recognize an abnormal state.
Transmission
[k][z][ ][Set ID][ ][FE] [ ][Cr]
Data FF : Read
Ark
[z] [] [Set ID] [] [OKiNG] [Data] [x]
Data 00: Normal (Power on and signal exist)
01 : No signal (Power on)
02: Turn the monitor off by remote control
03: Turn the monitor off by sleep time function
04: Turn the monitor off by RS-232C function
05: 5V down
06: AC down
07: Turn the monitor off by Fan Alarm function
08: Turn the monitor off by Off time function
09: Turn the monitor off by Auto sleep function
a: Turn the monitor off by AV Board detect
* This function is "read only"
99
To Next Page
Loading...
