98
01. Power (Command: k a)
I_ To control Power On/Off of the TV.
Transmission
[k] [a] [ ] [set ID] [ ] [Data] [Cr]
Data 00 : Power Off 01 : Power On
[a][ ] [set ID][ ] [OK/NG] [Data] [x]
I_ To show Power On/Off.
Transmission
[k] [a][] [Set !D] [] [FE] [Cr]
[a] [ ] [Set I D] [ ][OK/NO] [Data] [x]
* Similarly, if other functions transmit '0xFF' data based
on this format, Acknowledgement data feed back
presents status about each function.
* OK Ack.,Error Ack. and other messages may be display
on the screen when TV is power On.
02. Aspect Ratio (Command: k c) (Main Picture Size)
I_ To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the PICTURE menu.
Tran_mL_ion
[k] [c] [ ] [set ID] [] [Data] [Cr]
Data 01 : Normal screen(4:3)
02 : Wide screen(16:9)
04 : Zoom1
05 : Zoom2
06 : Original
07 : 14:9
09 : Just Scan
[c] [ ] [set ID][ ] [OKiNG] [Data][x]
* Using the PC input, you select either 16:9 or 4:3
screen aspect ratio.
* In HDMI/Component (over 720p) mode, Just Scan is
available.
* You can only select Original in UK digital teletext
(MHEG-5).
03. Screen Mute (Command: k d)
I_ To select screen mute on/off.
Tran_mL_ion
[k] [d][ ] [Set ID] [ ][Data] [Cr]
Data 00 : Screen mute off (Picture on)
01 : Screen mute on (Picture off)
Ack
[d] [] [Set ID] [] [OK/NG] [Data] [X]
04. Volume Mute (Command: k e)
I_ To control volume mute on/off.
You can also adjust mute using the MUTE button on
remote control.
Tran _mi_ion
[k] [e] [] [set ID] [] [Data] [Cr]
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
[e][ ] [set ID][ ] [OK/NO] [Data] [x]
0S. Volume Control (Command: k f)
I_ To adjust volume.
You can also adjust volume with the VOLUME buttons
on remote control.
Tran _mission
[k] [f] [ ] [Set ID][ ] [Data] [Cr]
Data Min:00-Max:64
* Refer to 'Real data mapping 1 ' See page 100.
Ack
[f] [ ] [set ID] [ ] [OK/NG] [Data] [x]
06. Contrast (Command: k g)
I_ To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[k] [g][ ] [Set ID][ ] [Data] [cr]
Data Min:00-Max:64
* Refer to 'Real data mapping 1 ' See page 100.
Ack
[g][ ][Set lD][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
I_ To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
[k] [h] [] [Set !D] [] [Data] [Cr]
Data Min:00_Max:64
* Refer to 'Real data mapping 1' See page 100.
[h] [ ][Set ID] [ ] [OK!NG] [Data] [x]
08. Colour (Command: k i)
I_ To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
[k] [i] [ ] [Set ID] [ ] [Data] [Cr]
Data Min:00 _Max:64
* Refer to 'Real data mapping 1 '. See page 100.
Ack
[i] [] [Set ID] [] [OK!NG] [Data] [x]
To Next Page
Loading...
