APPENDIX
Communication Parameters
_Baud rate : 9600 bps (UART)
NData length : 8 bits
_Parity : None
Stop bit : 1 bit
NCommunication code : ASCII code
mUse a crossed (reverse) cable.
Command Reference List
01. Power k a 00 - 01
%.:.._._._._..D_!_......................................................._......................................................_........................_[_._..._.._:..%......
03. Screen Mute k d 00 - 01
04. Volume Mute k e 00 - 01
05. Volume Control k f 00 - 64
k
%: _a_ ...................................................................................................................................g........................................................
9Z.%g!_*_>>....................................................................k.......................................................h................................................_.Q.:._..........
08. Colour k i 00 - 64
0_: TiO_.............................................................................................k.....................................................J............................................................
.J..Q:..._.b._EP.B__._...................................................................k.......................................................k................................................QQ.::.._ ..........
11. OSD Select k I 00 - 01
12. Remote control lock mode k m 00 - 01
13. Balance k t 00 - 64
J._..g_!_._mp_._:t_r_............................k.......................................................u................................................QQ.::.Q_.........
15. Abnormal Status k z 00 - 09
J._.:._.._g._ _............................................J.........................................................._..............................................................._1........................
..]....7........E.99.0.[{_..............................................................................J.........................................................)L....................._._[_.E....:_£....I_:.....]..Q._..
].8.:.>.ov.g_mm0_!..................................................m...................................................0.......................!_g£vc._.g:..1_1.....
.].._.:..._!30_.O.g!.._!O(_{l_........................................m....................................................I_...............................................0.0..:::..0].............
2Q.:..Key.............................................................................................m...................................................c.....................................Key..Ceae............
_1.:. _.9.0._Eg.!..!_.__k!.!g.!3_............................_ ...................................................g ...............................................9._.:._ ..........
_:.!_e_._._!ss_..(M_.!._)..................._........................................................!_......................!_S._:S.E._e..R:..19.!....
* When setting 15 - 22, a menu does not appear on screen.
Transmission / Receiving Protocol
Tran _mi_ion
[Command]] [Command2] [ ] [set !D] [ ] [Data] [cr]
[Command 1] :
[Command 2] :
[Set ID]
[DATA]
[Cr]
[]
First command to control the TV.
(j, k, m or x)
Second command to control the TV.
You can adjust the set ID to choose
desired monitor ID number in option
menu. Adjustment range is 1 - 99.
When selecting Set ID '0', every
connected set is controlled.
Set ID is indicated as decimal (1 -99)
on menu and as Hexa decimal
(Ox0-Ox63) on transmission/
receiving protocol.
To transmit command data.
Transmit 'FF' data to read status of
command.
Carriage Return
ASCII code '0x0D'
ASCII code 'space (Ox20)'
OK Acknowledgernent
[Command2] [] [Set ID][] [OK] [Data] [X]
* The TV transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if
the data is in data read mode, it indicates present sta-
tus data. If the data is in data write mode, it returns the
data of the PC computer.
Frror Acknowledgemenf
[c0mmand2] [][Set ID] [] [NG] [Data] [x]
* The TV transmits ACK (acknowledgement) based on
this format when receiving abnormal data from
nonviable functions or communication errors.
97
To Next Page
Loading...
