39
PICTURE CONTROL
If the picture is not clear and especially if characters are still trembling, adjust the picture phase manu-
ally. This function works in the following mode when the signal exist : RGB PC
MANUAL CONFIGURE(Adjustment for screen Position)
Press the MENU button and then use ▲/▼ button
to select the Picture menu.
Press the ► button and then use ▲/▼ button to
select Screen.
Press the ► button and then use ▲/▼ button to
select Manual Config.
Press the ► button and then use ▲/▼ button to
select Phase, Clock, H-Position or V-Position.
(When the H-Position and V-Position be changed,
Value may differ from the aspect ratio.)
Press the ◄ / ► button to make appropriate adjust-
ments.
Press the MENU button to move to the previous
menu screen.
1
2
3
4
5
6
▲▼◄► ꔋ MENU
Aspect Ratio
Picture Mode
• Backlight 100
• Contrast 100
• Brightness 50
• Sharpness 70
• Color 70
• Tint 0
Picture
▼
1
4 5
2
3
▲▼◄► ꔋ MENU
▲▼◄► ꔋ MENU
• Contrast 100
• Brightness 50
• Sharpness 70
• Color 70
• Tint 0
• Advanced
• Picture Reset
Screen
Auto config
Manual Config.
Reset
Picture
Screen
▼
Screen ►
Manual Config. ►
To set
Phase 8
Clock 50
H-Position 50
V-Position 50
▲