7700
SOUND CONTROL
SELECTING DIGITAL AUDIO OUT
This function allows you to select your preferred Digital Audio Output.
The TV can only output DOLBY Digital if a channel is broadcast with Dolby Digital audio.
When Dolby digital is available, selecting Auto in the Digital Audio Out menu will set SPDIF(Sony Philips Digital
InterFace) output to Dolby Digital.
If Auto is selected in the digital audio out menu when dolby digital is not available, SPDIF output will be PCM(Pulse-
code modulation).
Even if both Auto and Audio language have been set in a channel which broadcast Dolby Digital Audio, only Dolby
Digital will be played.
If the sample rate converter on this chip does not support 44.1 to 48kHz, this content should always produce
stereo PCM at digital output.
Select
AAUUDDIIOO
.
Select
DDiiggiittaall AAuuddiioo OOuutt
.
3
Select
AAuuttoo
or
PP CCMM
.
1
2
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
Manufactured under license from
Dolby Laboratories. “Dolby “and
the double-D symbol are trade-
marks of Dolby Laboratories.
• There is a possibility that when HDMI mode,
some DVD players do not make SPDIF sound.
At that time, set the output of the digital audio
of the DVD player to PCM.
Balance 0
Sound Mode : Standard
• SRS TruSurround HD : Off
• Treble 50
• Bass 50
• Reset
Digital Audio Out : PCM
TV Speaker : On
AUDIO
Move
OK
E
DDiiggiittaall AAuuddiioo OOuutt :: PPCCMM
LR
Balance 0
Sound Mode : Standard
• SRS TruSurround HD : Off
• Treble 50
• Bass 50
• Reset
Digital Audio Out : PCM
TV Speaker : On
AUDIO
Move
OK
E
DDiiggiittaall AAuuddiioo OOuutt :: PPCCMM
LR
Auto
PCM
PCM
D
D
To Next Page
Loading...
Need help?
LCD Panel Specification
Power
