6600
PICTURE CONTROL
1
Automatically adjusts picture position and minimizes image instability. After adjustment, if the image is still not cor-
rect, your set is functioning properly but needs further adjustment.
AAuuttoo ccoonnffiigguurree
This function is for automatic adjustment of the screen position, clock, and phase The displayed image will be
unstable for a few seconds while the auto configuration is in progress.
Auto Configure (RGB [PC] mode only)
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after Auto
adjustment in RGB (PC), you can adjust the
PPoossiittiioonn
,
SSiizzee
or
PPhhaassee
.
Select
PPIICCTTUURREE
.
11.. UUssiinngg OOSSDD
2
Select
SSCCRREEEENN
.
3
Select
AAuuttoo CCoonnffiigg
.
To S e t
Auto Config.
G
SCREEN
Move
Resolution
Position
Size
Phase
Reset
• Press the MENU or EXIT button to close the menu window.
• Press the RETURN button to move to the previous menu screen.
Yes No
• Contrast 100
• Brightness 50
• Sharpness 8
• Colour 50
• Tint 0
• Advanced Control
• Picture Reset
Screen
PICTURE
Move
OK
Screen
RG
D
To Next Page
Loading...
Need help?
LCD Panel Specification
Power
