- 15 -
Copyright ©2010 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
4.7 Outgoing condition Configuration
_ After all function test., press IN-STOP Key by SVC Remote
controller. And Make Ship Condition.
_ When pressing IN-STOP key by SVC remocon, Red LED are
blinked alternatively. And then Automatically turn off. (Must not
AC power OFF during blinking)
4.8 Internal pressure
Confirm whether is normal or not when between power board's
ac block and GND is impacked on 1.5kV(dc) or 2.2kV(dc) for one
second
To Next Page
Loading...
