27
User Menus
Move
OK
PICTURE
Screen
Adjusting Screen Color
Color Temperature : Color Settings
Cool : Slightly purplish white.
Medium : Slightly bluish white.
Warm : Slightly reddish white.
Dynamic Contrast : Optimizes the contrast automatically according to the brightness of the reflection.
Dynamic Color : Adjusts the Color of the reflection automatically to reproduce natural colurs as close as
possible.
Noise Reduction : Removing the noise up to the point where it does not damage the original
picture.
Gamma : Set your own gamma value.
On the monitor, high gamma values display whitish images and low gamma
values display high contrast images.
Black Level : (
Function works in the following mode - AV(NTSC), Component, HDMI-DTV)
adjusts
the contrast and the brightness of the screen using the black level of the screen.
Low : The reflection of the screen gets darker.
High : The reflection of the screen gets brighter.
Film Mode : (
Function works in the following mode - AV, Component 480i/576i)
When you watch a movie, this function adjusts the set to the best picture appearance.
White Balance :
This is the function to adjust the overall colour of the screen to the feeling you want.
( Function works in the following mode - Expert 1, Expert 2 Picture mode)
Color Management System : As the tool used by the experts to make adjustments by
using the test patterns, this does not affect other colours but
can be used to selectively adjust the 6 colour areas (Red/
Green/Blue/Cyan/Magenta/Yellow). Colour difference may not
be distinctive even when you make the adjustments for the
general video.
(Function works in the following mode - Expert 1,
Expert 2 Picture mode)
Advanced Control
High
Medium
High
Medium
High
Off
Color Temperature
Dynamic Contrast
Dynamic Color
Noise Reduction
Gamma
Black Level
Film Mode
Close
To Next Page
Loading...
Need help?
General
