1. How to update AUDIO MICOM program.
[Update using CD]
1. Change the filename to download as “MDS715_(Version).HEX”. Only upper cases are permitted.
ex) MDS715 : “MDS715_0709081.HEX”
2. Copy the file to the root folder of a CD and burn it.
3. Insert the CD to the SET, and move to the DVD function.
Then the upgrade process will be started with the upgrade information.
4. If the upgrade process is complete, the set will be rebooted with “Complete” message.
[Update using USB]
1. Change the filename to download as “MDS715_(Version).HEX”. Only upper cases are permitted.
ex) MDS715 : “MDS715_0709081.HEX”
2. Copy the file to the root folder of USB storage.
3. After Home-menu is displayed on Screen of SET, Put the USB into the SET.
Then the upgrade process will be started with the upgrade information.
4. If the upgrade process is complete, the set will be rebooted with “Complete” message.
2. How to update DVD program.
[Update using CD]
1. Copy DVD program(ex: LG_MDS715LD1_Version.Rom) to Root folder of CD, and burn it.
ex) P:LG_MDS715LD1_0911180.Rom
2. Insert the CD to the SET, then after a while the CD tray will be opened with upgrade information on
the screen.
3. Remove the CD, and press “PLAY” key in remote controller.
4. Remove and reconnect the power cable when it changes to logo screen from upgrade information.
Then the upgrade process is completed.
[Update using USB]
1. Copy DVD program(ex: LG_MDS715LD1_Version.Rom) to Root folder of the formatted USB and burn it.
ex) P:\LG_MDS715LD1_0911180.Rom
2. After Home-menu is displayed on Screen of SET, Put the USB into the SET.
Then the upgrade process will be started with the upgrade information.
3. Remove the USB, press "PLAY" key of the remote controller.
4. Remove and reconnect the power cable when it changes to logo screen from upgrade information.
Then the upgrade process is completed.
1-6
HOW TO UPDATE AUDIO MICOM & DVD PROGRAMS
To Next Page
Loading...
Need help?
General
