LG multi V ARUN080BSR0 - Page 60

60
ELECTRICAL WIRING
ENGLISH
MODE FUNCTION OPTION VALUE ACTION
RE-
MARK
Con-
tent
Display1 Content Display2 Content Display3
Con-
tent
Display4 Implement Display5
In-
stalla-
tion
Cool & Heat
Selector
oFF op1~op2
selected the
option
- -
change the
set value
blank
save in
EEPROM
Static pressure
compensation
oFF op1~op3
selected the
option
- -
change the
set value
blank
save in
EEPROM
Night low noise oFF op1~op15
selected the
option
- -
change the
set value
blank
save in
EEPROM
ODU address - - 0~254
set the
value
change the
set value
blank
save in
EEPROM
Snow removal &
rapid defrost
oFF op1~op3
selected the
option
- -
change the
set value
blank
save in
EEPROM
Target pressure
adjusting
oFF op1~op6
selected the
option
- -
change the
set value
blank
save in
EEPROM
* Functions save in EEPROM will be kept continuously, though the system power was reset.
* Dip switch 3 can be OFF except when installing the only 4 series indoor units
(named ARNU***4).
Setting the function
Select the mode/function/option/value using ‘▶’, ‘◀’ Button and confirm that using the ‘●’ but-
ton after dip switch No.5 is turned on.
DIP-SW01 7 - Segment
SW01C (Ɨ : confirm)
SW02C (ȭ : backward)
SW03C (ȯ : forward)
SW04C (
: cancel)
SW01D (reset)
1,MFL67798027,영영 2018. 6. 18. 영영 3:07 Page 60