74
ELECTRICAL WIRING
ENGLISH
Auto dust removal mode
Master unit PCB DIP switch on : No.5
Select the mode using ‘▶’, ‘◀’ Button :
“Func” Push the ‘●’ button
Select the Function using ‘▶’, ‘◀’ Button :
“Fn10” Push the ‘●’ button
Select the Option using ‘▶’, ‘◀’ Button :
“on” ~ “oFF” Push the ‘●’ button
Auto dust removal mode is set
CAUTION
• Ask an authorized technician to setting a function.
• If use a function, first install a Central controller.
!
Reversing rotation of the fan motor, it’s possible to remove dust automatically.
Mode setting method
To Next Page
Loading...
