ELECTRICAL WIRING
75
ENGLISH
Smart Load Control
Master unit PCB DIP switch on : No.5
Select the mode using ‘▶’, ‘◀’ Button :
“Func” Push the ‘●’ button
Select the Function using ‘▶’, ‘◀’ Button :
“Fn14” Push the ‘●’ button
Select the Option using ‘▶’, ‘◀’ Button :
“oFF”, “op1”~”op3” Push the ‘●’ button
Smart Load Control is set
CAUTION
• Ask an authorized technician to setting a function.
• If use a function, first install a Central controller.
!
According to the difference of indoor temperature and setting temperature, switch the target
pressure to increase efficiency.
Mode setting method
Option Setting
Off Off
op1 Smooth Mode
op2 Quick Mode
op3 Power Mode
Mode Setting
To Next Page
Loading...
