58
ELECTRICAL WIRING
ENGLISH
Configuration of DIP Switch
123456
Normal Operation
xxxxxx
Saving power consumption 1
xx●xxx
Saving power consumption 2
xxx●xx
Night low noise 1
● x x ● x x
Night low noise 2
x●●xxx
Forced cooling mode
●xxxxx
Vaccum mode
xxxxx●
Target pressure adjusting
xxxx●●
CAUTION
• "X" mark means DIP switch must be off, Otherwise the function may not perates correctly.
• If each DIP switch doesn't set correctly, unit will operate abnormally.
• In case of proceeding test run, start after checking if all indoor unit is off.
!
To Next Page
Loading...
