Using Multi-Room 13
Using Multi-Room
3
Option 2. Wired connection (MUSICflow Mesh Network Connection)
Connect one of MUSICow products (sound bar, speaker or bridge) to the home router using LAN cable.
Then you can connect the additional MUSICow products (Optional) to your home network wirelessly
(MUSICow Mesh Network). Refer to “Step 4. Add Speakers (Optional)” on page 14.
If you have a bridge
Bridge (Wired Connection)
à
Sound bar (Add speaker)
à
Other speakers (Add speaker)
If you do not have a bridge
Sound bar (Wired Connection)
à
Other speakers (Add speaker)
LAN Cable
Simple Setup Guide (Wired Connection)
1. Ensure that your smart device is connected to your Wi-Fi network.
2. Select the product you want to connect.
3. Launch Music Flow Player App and follow “Wired Connection” instructions on set-up wizard.
4. Connect LAN cable from router to any one of MUSICflow product (sound bar, speaker or bridge).
5. Power on the MUSICflow product and wait until you see a white LED become solid.
6. If you install successfully, update speaker software to the latest:
[Home
à
Settings
à
Version Info.]
m Tip
Separated from the router’s Wi-Fi environment, composes wireless network among MUSICow products.
Using MUSICow mesh network, Wireless coverage is expanded, which oers stable music streaming service.
In the below case, MUSICow Mesh Network connection is recommended.
1. When the Wi-Fi coverage cannot reach whole house because home router performance is unstable.
(In case that your home router supports only 802.11 b/g 2.4 GHz.)
2. When you want to enjoy MUSICflow system in stable wireless network environment.
3. When you want to use in below mode.
1) Multi-Room & Group-play Mode
2) Home Cinema Mode
3) Hi-Fi (24 bit/192 kHz) Mode : When you enjoying the high-quality audio source (ex: flac)
To Next Page
Loading...
Need help?
General
