Getting Started 11
Getting Started
1
Mounting the main
unit on a wall
Mounting the main unit on a wall, you should
connect all the cables for operating the unit. For
details, refer to the page 13.
You can mount the main unit on a wall.
Prepare screws and brackets.
Main unit
Wall bracket (3)
WALL BRACKET
INSTALL GUIDE (3)
y
The set may be damaged if the set falls
down on its side.
y
Please do not lift the set by holding only
center part alone.
y
Please two people should lift the set by
sides when moving it.
>
Caution
1. Fitted with Bracket Center Guide according to
Screen Center and Bottom Line.
SCREEN
2. When you mount it on a wall (concrete), use
the wall plugs. You should drill some holes. A
guide sheet (WALL BRACKET INSTALL GUIDE)
is supplied to drill. Use the sheet to check the
point to drill.
Make sure that the triangle mark on the wall
bracket should be facing upwards.
,
Note
3. Remove the Wall bracket install guide.
4. Fix it with screws (not supplied) as shown in the
illustration below.
SCREEN
Screw (8) &
Wall Plug (8)
NB5630A-NS.DDEULLK_ENG.indd 11 2013-10-23 9:14:45