LG NB5630A - Remote Control

Getting Started 7
Getting Started
1
Remote control
y
Once the sound bar is shut down to
standby, please wait several seconds before
trying to use remote again.
y
When you press any button on the remote
control, the red LED on the main unit blinks
twice. (Except
1
(Power) button)
y
The color LED that indicates the current
function is lit up for about 3 seconds
when you press the function buttons :
,
OPTICAL.
y
If the volume level reached a minimum or
a maximum, the red LED on the unit is lit
up when you adjust the volume level of the
sound bar.
y
If the woofer level reached a minimum or
a maximum, the red LED on the unit is lit
up when you adjust the woofer level of the
wireless subwoofer.
,
Note
• • • • • • • • • •
a
• • • • • • • • •
1
(Power) : Switches the unit ON or OFF.
VOL +/- : Adjusts speaker volume.
?
: The button is not available for any function.
(Mute) : Mutes the sound.
: Select Bluetooth function.
OPTICAL: Select Optical function.
?
: The button is not available for any function.
• • • • • • • • • •
b
• • • • • • • • •
WOOFER LEVEL +/- : Sets the sound level of
woofer speaker.
3D SOUND : Turns on and o the 3D Sound mode.
DRC : Sets DRC(Dynamic range control) function.
• • • • • • • • • •
c
• • • • • • • • •
AUTO POWER : This function is automatically
turned on the unit.
TV Control buttons: Controls the TV. (LG TV only)
You can control the functions on LG TV : Power,
input source, sound level, channels.
NB5630A-NS.DDEULLK_ENG.indd 7 2013-10-23  9:14:43