13
2
Connecting
Connecting
y
Do not install this unit upside down. It can
damage the parts of this unit or be the
cause of personal injury.
y
Do not hang onto the installed unit and
avoid any impact to the unit.
y
Secure the unit rmly to the wall so that it
does not fall o. If the unit falls o, it may
result in an injury or damage to the product.
y
When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
>
Caution
Detach the unit from the bracket as shown
below.
,
Note
Connection and setting
up
Connecting the AC adapter
Prior to installing the wall mount, rst connect the
cable.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC. IN adapter
input.
3. Plug the AC power cord into an AC outlet.
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
>
Caution
OPTICAL In connection
Connect the OPT. IN jack on the back of the unit to
OPTICAL OUT jack on the Cinema beam TV using
an OPTICAL cable.
NB5630A-NS.DDEULLK_ENG.indd 13 2013-10-23 9:14:48
To Next Page
Loading...
