LG OM4560 - Advanced Features and Settings

Operating
24
Operating
3
Advanced Operations
Recording to USB
You can record a various sound source to USB.
(CD, AUX, Tuner)
1. Connect the USB device to the unit.
2. Press F / WIRELESS BOOM to select a function
you want to record.
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
in full stop status.
Programmed list recording - After showing the
Programmed list, you can record it to USB.
(Refer to page 26)
3. Start the recording by pressing USB REC/DEMO.
4. To stop recording, press
I
on the unit or
Z
on the remote control.
Pausing recording
During recording, press
T
on the unit or
d
/
M
on
the remote control to pause recording. Press it again
to restart recording.
(Tuner/AUX only)
y
You can control recorded MIC sound according
to MIC volume when you record in AUDIO CD
X1 speed REC.
y
VOICE CANCELLER or KEY CHANGER
will be reset, if you use recording function
during operating VOICE CANCELLER or KEY
CHANGER.
y
VOICE CANCELLER or KEY CHANGER can
not be operated during recording.
,
Note
To select recording bit rate and speed
1. Press and hold USB REC/DEMO for 3 seconds.
2. Press
C
/
V
on the remote control or
Y
/
U
on the unit to select a bit rate.
3. Press USB REC/DEMO to set.
4. Press
C
/
V
on the remote control or
Y
/
U
on the unit to select a desired
recording speed. (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press USB REC/DEMO to finish the setting.
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound recordings,
may be an infringement of copyrights and
constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights