LG OM4560 - Programmed Playback

Operating
26
Operating
3
Programmed Playback
The program function enables you to store your
favorite les from any disc or USB device.
A program can contain 20 tracks/les for each media.
(CD, USB) Possible to save a total of 40 tracks/les.
Making Programmed list
It is supported only on stop status.
1. Press PROGRAM/MEMORY on the remote
control.
2. Press
C
/
V
on the remote control to select
a track/file.
3. Press PROGRAM/MEMORY on the remote
control to save and select a next track/file.
4. Repeat steps 2 - 3 to store other tracks/files.
(You can modify the list by pressing
PRESET.FOLDER
W
/
S
on the remote control to
select the program number.)
5. Press PROGRAM/MEMORY on the remote
control once again.
To play the programmed list, press
d/M
after you
make the list.
When making or modifying the programmed list,
REPEAT mode is off.
,
Note
Deleting Programmed list
Deleting function only works in the edit mode.
1. Press PROGRAM/MEMORY on the remote
control in stop status.
2. Select a song by pressing PROGRAM/MEMORY
or PRESET.FOLDER
W
/
S
on the remote control
repeatedly.
3. Press DELETE while a song is selected.
y
Program is switched off in the case below.
- Changing to a different function.
- Turning off and on the unit.
- Operating the numeric buttons on the
remote control.
y
Programmed list is cleared in the case below.
- Removing the disc or the USB device.
- Deleting or recording music les in the USB
device.
- Unplugging the Power Cord.
,
Note