82
Settings
Enabling Wi-Fi Direct
to share through
SmartShare
Wi-Fi Direct cannot be enabled while
using other Wi-Fi functions.
Wi-Fi Direct automatically scans
nearby Wi-Fi Direct devices and
the searched devices will be listed
up in the order of arrival and you
can select a specific device to
share multimedia data through
SmartShare.
On the home screen, touch
the Application tab and select
Settings.
Touch Wireless & networks and
select Wi-Fi Direct Settings.
Ensure Wi-Fi Direct is selected.
Select a device to connect in the
scanned device list.
Forced G/O mode - Touch to
activate group owner mode that
enables the legacy Wi-Fi devices to
connect by scanning your phone.
In this case you must enter the
1
2
3
4
•
password that is set in the Menu >
Advanced > Password.
NOTE: When your phone becomes
group owner, it will consume
more battery power than being
a client. Wi-Fi Direct connection
does not provide Internet service.
Additional cost may be incurred
when connecting and using online
services. Check data charges with
your network provider.
How to use On-Screen
Phone
On-Screen Phone allows you to view
your mobile phone screen from a PC
via a USB or Bluetooth connection.
You can also control your mobile
phone from your PC using the mouse
or keyboard.
To Next Page
Loading...
