17
PREPARATION
How to Install the Projector On a Tripod
y
You can install this projector on a camera tripod as shown below.
y
When stabilizing the tripod, we recommend using a locking bolt of standard size
4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm.
(If it is longer than the maximum allowed size, it may damage the projector.)
Bottom side of
the projector
Bottom side of
the
battery
The projector is
connected to this part.
The
battery
is
connected to this part.
Tripod
Tripod
Bolt used to attach
the projector
Bolt used to attach
the battery
To Next Page
Loading...
