23
MAINTENANCE
ENGLISH
2
Remove the old side brushes and put in the
new side brushes.
3
Tighten the screws to fix the side brushes.
Cleaning the Front Wheel
Hair or dust particles tend to affix to the front
wheel. The universal wheel must be cleaned
regularly or as needed.
a
Wheel
b
Shaft
1
Pull the front wheel up to remove it.
2
Clean away the hair or debris tangled around
the wheel or in the wheel cavity.
3
Reinstall the wheel and push it in untill it clicks
into place.
• Please do not rinse the front wheel with water.
Cleaning the Mopping Module
It is recommended to clean the mop pad after each
use.
1
Take out the mop pad from the module.
2
Rinse with water and air dry to avoid mildew or
odours.
Cleaning the Sensors
Clean the cliff detection sensors regularly with a
soft brush. Failing to clean the sensors can cause
the cleaner to fall froma ledge due to a dusty or
global_main.book.book Page 23 Monday, July 10, 2023 3:22 PM
To Next Page
Loading...
Need help?
General
