21
Examples Using T9 Text Input
Typing In T9 Mode
When you want to use T9 Mode, check that T9En is shown at
the bottom of the display. To write the desired word, press each
key once for one letter.
For example, to write “Call the office”, follow these steps:
1. Press: Soft Key 2 to change letter case to T9En mode.
2. Press: .
3. Press: to complete the word and add a space.
4. Press: .
5. Display: Call the office.
As you can see, the word changes after each key press.
Therefore you don’t need to pay much attention to what hap-
pens on the display before you have keyed in the whole word.
Using the NEXT Key
After you have finished typing a word, if the word displayed is
not the word you want, press to display additional choic-
es.
For example, follow these steps :
1. Press: .
2. Display: Good
3. Press: .
4. Display: Home, Gone, Hood......
RD2230
To Next Page
Loading...
