32
TROUBLESHOOTING
Performance
Appliance will not
turn on.
House fuse is blown, circuit breaker has tripped, or power
outage has occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse
capacity. If the problem is a circuit overload, have it
corrected by a qualified electrician.
Appliance does
not heat.
House fuse is blown, circuit breaker has tripped, or power
outage has occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse
capacity. If the problem is a circuit overload, have it
corrected by a qualified electrician.
Water leaks. The water container hose or the optional drain hose is not
connected correctly.
• Connect the water container hose or the optional drain hose
correctly.
The door is closed while clothes or foreign substance is
caught in the door.
• Check if clothes or foreign substance is caught in the door
before using the appliance. If water leaks continuously,
contact the LG Electronics Customer Information Centre.
Appliance runs
and pauses by
itself after the
drying cycle
finishes.
This is how the anti crease option works.
• Make sure that the anti crease option has been set. The
option is designed to prevent creases that are formed when
the clothes are not unloaded promptly after the drying cycle.
When the option is set, the appliance runs for 10 seconds
and pauses for 5 minutes. The option is works for up to 2
hours.
Symptoms Possible Cause & Solution
Clothes take too
long to dry.
Load is not properly sorted.
• Separate heavy items from lightweight items. Larger and
heavier items take longer to dry. Light items in a load with
heavy items can fool the sensor because the light items dry
faster.
Symptoms Possible Cause & Solution
To Next Page
Loading...
