LG RL3 User Manual

Operating20
Operating
3
Radio Operations
Be sure to fully extend the FM wire antenna.
Listening to the radio
1. Press F /
3
DUAL until FM appears in the
display window.
The last received station is tuned in.
2. Auto tuning :
Press and hold TUNING-/+ on the remote
control or
C
/
V
on the unit until the frequency
indication starts to change, then release. Scanning
stops when the unit tunes in a station.
Or
Manual tuning :
Press TUNING-/+ on the remote control or
C
/
V
on the unit repeatedly.
3. Adjust the volume by pressing VOL +/- on
the remote control or pressing +/- on the unit
repeatedly.
Improving poor FM reception
Press
N
. This will change the tuner from stereo to
mono and usually improve the reception
(DUAL mode only).
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press F /
3
DUAL until FM appears in the display
window.
2. Select the desired frequency by pressing
TUNING -/+ on the remote control or
C
/
V
on the unit.
3. Press PRESET MEMORY on the remote control.
A preset number will blink in the display window.
4. Press PRESET/FOLDER
W
/
S
on the remote
control to select the preset number you want.
5. Press PRESET MEMORY on the remote control.
The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET/FOLDER
W
/
S
on the remote control.
Deleting all the saved stations
1. Press PRESET DELETE on the remote control.
“DEL”, “ALL” will flash up alternately on the unit
display.
2. Press PRESET DELETE on the remote control to
erase all the saved radio stations. “DELETED ALL”
will scroll on the unit display.

LG RL3 Specifications

Power

mains supply voltage	200 240 V
frequency	50 / 60 Hz
bus power supply voltage (USB)	5 V

Audio

total RMS output power	130 W
bus power supply current (USB)	500 mA

Weight and Dimensions

width	235 mm
height	962 mm
depth	250 mm