LG RL3 User Manual

Operating24
Operating
3
Setting the Clock
1. Turn the unit on.
2. Press and hold CLOCK on the remote control.
3. Select time mode by pressing
C/V
on the
remote control.
- AM 12:00 (for an A and P display) or 0:00
(for a 24 hour display).
4. Press SET on the remote control to confirm your
selection.
5. Select the hours by pressing
C/V
on the
remote control.
6. Press SET on the remote control.
7. Select the minutes by pressing
C/V
on the
remote control.
8. Press SET on the remote control.
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold ALARM on the remote control.
3. Press
C/V
on the remote control to change
the hours and minutes and press SET on the
remote control to save.
4. Press
C/V
on the remote control to select
function and press SET on the remote control to
save.
- Press
C/V
on the remote control to select a
preset number when you select tuner and then,
press SET on the remote control.
If there is no preset number, this step is skipped.
5. Press
C/V
on the remote control to change
the volume and press SET on the remote control
to save.
y
If you set the clock time, you can check the
time by pressing CLOCK on the remote
control even when the player is turned off.
y
You can set alarm after you set the clock
time.
y
If you set the clock time and alarm, you
can check the alarm setting information by
pressing ALARM on the remote control even
when the unit is turned off.
y
You can select ALARM ON/OFF mode by
pressing ALARM on the remote control.
,
Note

LG RL3 Specifications

Power

mains supply voltage	200 240 V
frequency	50 / 60 Hz
bus power supply voltage (USB)	5 V

Audio

total RMS output power	130 W
bus power supply current (USB)	500 mA

Weight and Dimensions

width	235 mm
height	962 mm
depth	250 mm