LG RL4 User Manual

Connecting 13
Connecting
2
AUX OUT Connection
Connect an input of auxiliary device to the AUX OUT
(L/R) connector.
If your device has only one input for audio (mono),
connect it to the left (white) audio jack on the unit.
Audio cable
Auxiliary device
PARTY LINK with AUX
You can connect two units to play music together.
1. Connect AUX OUT (L/R) connector on a unit to
the AUX IN connector on the other unit using
audio cable.
2. Press and hold
F
connected through AUX OUT.
“ON - DELAY ” appears in the display window and
change to “DELAY time” soon.
3. Press
C
/
V
to adjust delay setting.
When “ON - DELAY” and “DELAY time” are
displayed in the display window, you can adjust
the delay time.
4. Press
F
to save the delay setting.
y This function is not available on LG TV
function.
y The initial delay is 30 ms. If you want to
change the Delay time, press C
/V. The
connected device’s delay may differ. If Audio
Sync is not matched, adjust delay of PARTY
LINK with AUX to synchronize sound.
y It is available to adjust the delay from 0 ms to
200 ms. Synchronizing tempo is not available
depending on the devices.
y Delay value is saved and PARTY LINK with
AUX is turned off when the unit turns off.
y You can select ON - DELAY / OFF - DELAY
mode by pressing and holding
F.
y In case of the microphone, delay setting is
not applied.
,
Note

LG RL4 Specifications

General

Brand	LG
Model	RL4
Category	Speaker System
Language	English