Why does my LG Receiver have no power?
- JJames Gallegos DDSSep 4, 2025
If your LG Receiver has no power, make sure the power cord is securely plugged into the wall outlet.
Why does my LG Receiver have no power?
If your LG Receiver has no power, make sure the power cord is securely plugged into the wall outlet.
How to stop loud humming from my LG SH52TH-W?
If you're experiencing loud hum or noise from your LG Receiver, consider the following: * Clean the disc, as it might be dirty. * Ensure that the speakers and components are securely connected. * Move the TV away from the audio components, as the DVD/CD Receiver might be too close to the TV.
Why won't my LG SH52TH-W Receiver start playback?
If your LG Receiver isn't starting playback, consider these possible reasons: * Make sure a disc is inserted. * Ensure the inserted disc is playable. * Check that the disc is placed correctly, with the playback side down. * Verify the disc is placed within the guide on the disc tray. * Clean the disc if it's dirty. * If a menu is on the TV screen, press the SETUP button to turn it off. * If the Rating level is set, cancel the Rating function or change the rating level.
What to do if my LG SH52TH-W Receiver has no picture?
If your LG Receiver shows no picture, here are a few things to check: * Ensure that your TV is set to the correct video input mode to receive the DVD signal output. This will allow the picture from the DVD/CD Receiver to appear on the TV screen. * Verify that the video cable is securely connected to the jacks. * Make sure the connected TV is turned on.
What to do if the DVD/CD Receiver audio CD indicator does not work on my LG SH52TH-W Receiver?
If the DVD/CD Receiver audio CD indicator on your LG Receiver isn't working, make sure a disc is inserted.
What causes loud hum or noise from my LG SH52TH-W Receiver?
If you are hearing a loud hum or noise from your LG Receiver, try these solutions: * Clean the disc. * Connect the speakers and components securely. * Move your TV away from the audio components.
Why can't my LG SH52TH-W Receiver tune into radio stations?
If your LG Receiver is not tuning into radio stations, make sure the antenna is securely connected and properly positioned. If the signal strength is weak, try tuning in the station manually. If no stations are preset, you may need to preset them.
What to do if the playback picture is poor on my LG Receiver?
If the playback picture on your LG Receiver is poor, start by cleaning the disc. Ensure a playable disc is inserted correctly (label side up) and placed within the guide on the disc tray. If a menu is on the screen, press the SETUP button to turn it off. Also, check if the Rating level is set and, if so, cancel the Rating function or change the rating level.
How to troubleshoot no power on my LG SH52TH-W Receiver?
If your LG Receiver isn't powering on, the most common cause is a disconnected power cord. Ensure the power cord is securely plugged into the wall outlet.
Why is my LG Receiver making a loud humming noise?
If you're hearing a loud hum or noise from your LG Receiver, start by cleaning the disc. Ensure that all speakers and components are securely connected. Also, try moving the TV away from the audio components, as they may be too close together.
HDMI Outputs | 1 |
---|---|
Bluetooth | Yes |
USB Playback/Input | Yes |
Input Sensitivity | 200 mV |
Channels | 5.1 |
Response Bandwidth | 20 - 20000 Hz |
Input Impedance | 47kΩ |
Tuning Range | 87.5 - 108 MHz |
Connector Type | RCA |
Information for service, shipping, and packing the unit safely.
Precautions for cleaning and maintaining the unit's exterior surfaces.
Recommendations for regular inspection and maintenance of the unit.
Manual advice, symbol explanations, and notes for operating the unit.
Disc types, regional codes, and SIMPLINK function details.
Diagrams and descriptions of the front and rear panel controls and connectors.
Detailed explanation of the remote control buttons and their functions.
Instructions for connecting the receiver to a TV via video or component cables.
Connecting external devices, USB usage, and antenna setup.
Instructions for connecting the receiver to an HDMI-equipped TV.
Guide to connecting the main unit, wireless transmitter, and speakers.
Instructions on attaching ferrite cores to speaker cables to reduce noise.
Information on wireless system setup and LED indicators.
Steps for assembling speakers and connecting them to the stands.
Procedure to set or reset the ID for wireless transmitter and receiver.
Troubleshooting for no sound from rear speakers.
Displaying disc info and making initial settings via the setup menu.
How to select language for setup menu and on-screen display.
Selecting preferred language for audio tracks, subtitles, and disc menus.
Settings for TV Aspect Ratio (4:3, 16:9) and Display Mode (Letterbox, Panscan).
Options for receiver's audio settings like DRC, Vocal, and HD AV Sync.
Settings for the built-in 5.1 channel surround decoder.
Settings for parental control, DivX registration, and Semi Karaoke.
Overview of buttons and their operations for playback controls like Play, Pause, Skip, Scan.
Advanced playback, screen saver, system select, and TV remote control functions.
Guide to playing audio files and creating programmed playback sequences.
Instructions for playing JPEG files and using slide show features.
Guide to playing DivX movie files and managing subtitles.
Steps to preset, store, and listen to FM/AM radio stations.
Settings for sleep timer, display brightness, mute, and input source selection.
Explanation of XTS, VIRTUAL sound, and Sound Mode options.
Lists of codes for language and DVD disc rating area selection.
Solutions for power, unresponsiveness, and no picture issues.
Fixes for audio problems, poor picture quality, playback errors, and noise.
Troubleshooting for radio tuning and remote control malfunctions.
Solution for a dim front panel display.
General, video, and audio specifications of the unit.
Tuning range, sound output power, and amplifier specifications.
Specifications for speakers and the wireless system components.