LG Therma V AHNW16606A2 - Sanitary Water Tank and Solar Thermal Kit

Accessories Installation
Installation Manual 61
ENGLISH
To establish sanitary water circuit, 3way valve and sanitary water tank kit is required. If solar thermal
system is pre-installed at the installation field, solar thermal kit is required to interface solar thermal
system – to – sanitary water tank – to –
General Information
supports following 3way valve.
(1) : SPDT = Single Pole Double Throw. Three wires consist of Live1 (for selecting Flow A), Live 2
(for selecting Flow B), and Neutral (for common).
(2) : 'Flow A' means water flow from the indoor unit to under floor water circuit.
(3) : 'Flow B' means water flow from the indoor unit to sanitary water tank.
Sanitary Water Tank and Sanitary Water Tank Kit/Solar Thermal Kit
Yes
Selecting “ Flow B” between
“ Flow A” and “ Flow B” (3)
Yes
Selecting “ Flow A” between
“ Flow A” and “ Flow B” (2)
230V ACSPDT
3-wire
(1)
SupportedOperating ModePowerType