Safety Precautions
Installation Manual 7
ENGLISH
Do not install the water
pipe system as Open
loop type.
• It may cause failure of
unit.
Use a vacuum pump or
inert (nitrogen) gas
when doing leakage
test or purging air. Do
not compress air or
oxygen and do not use
flammable gases.
• There is the risk of
death, injury, fire or ex-
plosion.
Make sure the con-
nected condition of
connector in product
after maintenance.
• Otherwise, it may cause
product damage.
For installation, always
contact the dealer or an
Authorized Service
Center.
• There is risk of fire, elec-
tric shock, explosion, or
injury.
Do not install the unit
on a defective installa-
tion stand.
• It may cause injury, acci-
dent, or damage to the
unit.
Be sure the installation
area does not deterio-
rate with age.
• If the base collapses, the
unit could fall with it,
causing property dam-
age, unit failure, and per-
sonal injury.
Do not modify or ex-
tend the power cable.
• There is risk of fire or
electric shock.
Do not install, remove,
or reinstall the unit by
yourself (customer).
• There is risk of fire, elec-
tric shock, explosion, or
injury
For antifreeze, always
contact the dealer or an
authorized service cen-
ter.
• Almost the antifreeze is
a toxic product.
Do not touch leaked refrigerant directly.
• There is risk of frostbite.
To Next Page
Loading...
