LG UltraGear 32GN63T User Manual

13
ENGLISH
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount plate or other compatible
devices.
1 Place the screen face down. To protect the monitor panel (screen), cover the
surface with a soft cloth or the monitor protection pad included in the product
package.
2 Remove the four screws tightened on the back of the monitor.
3 Place the wall mount plate onto the monitor and align it with the screw holes.
4 Tighten the four screws using a screwdriver to fix the plate to the monitor.
NOTE
• The wall mount plate is sold separately.
• For more information on installation, refer to the wall mount plate’s installation
guide.
• Be careful not to apply too much force while mounting the wall mount plate as it
may cause damage to the screen.
Installing on the Wall
Install the monitor at least 100mm (3.94 inches) away from the wall and leave
about 100mm (3.94 inches) of space at each side of the monitor to ensure
sufficient ventilation. Detailed installation instructions can be obtained from your
local retail store. Alternatively, please refer to the manual for how to install and set
up a tilting wall mounting bracket.
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)

LG UltraGear 32GN63T Specifications

General

Screen Size	31.5 inches
Resolution	2560 x 1440 (QHD)
Panel Type	VA
Refresh Rate	165Hz
Aspect Ratio	16:9
Brightness	350 cd/m²
HDR	HDR10
Adaptive Sync	AMD FreeSync Premium
VESA Mount	100 x 100 mm
Contrast Ratio	3000:1
Connectivity	2x HDMI, 1x DisplayPort
Color Gamut	sRGB 95%
Viewing Angle	178º/178°