LG UP970 - Selecting a Subtitle Language; Hearing a Different Audio; Watching from a Different Angle; Changing the TV Aspect Ratio

Operating 37
Operating
4
Selecting a subtitle language
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b).
3. Use W/S to select the [Subtitle] option.
4. Use A/D to select desired subtitle language.
By pressing ENTER (b), you can set various
subtitle options.
5. Press BACK (1) to exit the On-Screen display.
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, press TITLE/POPUP or DISC MENU button
and choose the appropriate subtitle from the
selections on the disc menu.
,
Note
Hearing a different audio
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b).
3. Use W/S to select the [Audio] option.
4. Use A/D to select desired audio language,
audio track or audio channel.
5. Press BACK (1) to exit the On-Screen display.
y Some discs allow you to change audio
selections only via the disc menu. In this case,
press TITLE/POPUP or DISC MENU button
and choose the appropriate audio from the
selections on the disc menu.
y Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
y On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
,
Note
Watching from a different angle
er
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b).
3. Use W/S to select the [Angle] option.
4. Use A/D to select desired angle.
5. Press BACK (1) to exit the On-Screen display.
Changing the TV Aspect Ratio
eoy
You can change the TV aspect ratio setting during
playback.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b).
3. Use W/S to select the [TV Aspect Ratio]
option.
4. Use A/D to select desired option.
5. Press BACK (1) to exit the On-Screen display.
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Settings] menu is
not changed.
,
Note