10
INSTALLATION
INSTALLATION
Before Installation
Dimensions and Clearances
Too small of a distance from adjacent items may
result in the degradation of freezing capability and
increased electricity costs. Allow over 50 mm of
clearance between the back of the appliance and
the wall when installing the appliance.
NOTE
You can determine what type of appliance it is by
looking at the label inside the appliance.
Ambient Temperature
The appliance is designed to operate within a
limited range of ambient temperatures,
depending on the climate zone.
The internal temperatures could be affected by
the location of the appliance, the ambient
temperature, the frequency of door opening and
so on.
The climate class can be found on the rating
label.
* Australia, India, Kenya
** Argentina
NOTE
The appliances rated from SN to T are intended
to be used at an ambient temperature between
10 ºC and 43 ºC.
Levelling the Appliance
Adjusting the Levelling Leg
If the appliance seems unsteady, or the doors do
not close easily, adjust the appliances tilt using the
instructions below.
- Type (mm)
- a b c d
A 700 700 600 600
B 1 760 1 720 1 720 1 640
C 680 680 710 710
D 5 5 5 5
E 675 675 705 705
F - - - -
G 1 309 1 309 1 254 1 254
H 1 212 1 212 1 031 1 031
Climate Class Ambient Temperature
Range ºC
SN (Extended
Temperate)
+10 - +32
N (Temperate) +16 - +32
ST (Subtropical) +16 - +38 / +18 - +38**
T (Tropical) +10 - +43* / +16 - +43 /
+18 - +43**
To Next Page
Loading...
