22
OPERATION
Fill the ice tray with water up to the marked water
line.
WARNING
Fill with potable water only.
CAUTION
Be careful not to twist the ice tray with force as it
can be broken.
If you open and close the freezer door
frequently, it may take longer for water to be
frozen.
NOTE
If the ice tray is overfilled, the ice cubes may stick
together and be difficult to remove.
Ice can be removed more easily by pouring
water on the ice tray.
Automatic Icemaker
Before Using the In-Door
Icemaker
CAUTION
The first ice and water dispensed may include
particles or odour from the water supply line or
the water tank.
If discolored ice is dispensed, check the water
tank and the water supply for a possible source.
If the problem continues, contact the LG
Electronics customer information centre. Do not
use the ice or water until the problem is
corrected.
Do not touch the automatic icemaker with your
hand or a tool.
Do not remove the cover of the automatic
icemaker.
Dispose of the ice inside the ice bin if you go on
vacation or if an extended power outage occurs.
NOTE
The icemaker produces ice normally when
approximately 48 hours have passed after the
appliance is initially installed.
If the ice bin is completely filled with ice, ice
production will stop.
Sound of ice dropping into the ice bin is normal.
If ice cubes are stored in the ice bin for a long
period of time, they may clump together and
may not be separated easily. In such a case,
empty the ice bin and allow fresh ice to be made.
In-Door Icemaker
The automatic icemaker can automatically make 6
cubes at a time, 30-50 cubes within a 24-hour
period if conditions are favorable. This amount
may vary according to the environment (ambient
temperature around the appliance, frequency of
the door being opened, amount of food stored in
the appliance, etc.).
Turning the Automatic
Icemaker On or Off
To turn the automatic icemaker On/Off, press the
Ice On/Off
button on the control panel.
Normal Sounds You May Hear
The icemaker water valve will buzz as the icemaker
fills with water. If the
Ice On/Off
button is set to
On
, it will buzz even if it has not yet been hooked up
To Next Page
Loading...
